COI Tracking ServiceCall (333) 333 333
Sample deliverable

Sample Sub Risk Snapshot

A Sub Risk Snapshot lists each sub named on a general contractor’s permits, the public record read for it and the date that matters, and the sample below uses only fictional companies.

Call (333) 333 333
Direct line(333) 333 333
  • Call, no forms
  • Fictional names, real layout
  • Live flags checked that morning
Sample Sub Risk Snapshot cover with fictional companies and its date logic A filing folder labelled sample and fictional data. Inside, a Sub Risk Snapshot for Example Construction Co. shows a timeline: records checked on November 21, 2026, and a city electrical license for Sample Electric Co. that expires on December 4, 2026, 13 days later. A summary counts one flag, one watch item, two subs with no flag, one sub not checked and one name held for review. A footer notes the flag was re-checked on the official site the morning of the send. SAMPLE · FICTIONAL DATA Sub Risk Snapshot Example Construction Co. · sample permits DATE LOGIC Nov 21, 2026 Dec 4, 2026 Records checked License expires 13 days Sample Electric Co. Flag: city electrical license expires before the next scheduled check 1 flag · 1 watch · 2 no flag 1 not checked · 1 held for review Flag re-checked on the official site the morning of the send
Short answer

What a Sub Risk Snapshot is

A Sub Risk Snapshot is the document COI Tracking Service sends a general contractor after each check. It lists every subcontractor named on that contractor’s public permits in a supported market, the record read for each one, the date on that record and a status. The sample on this page uses invented companies so the layout can be shown in full.

Each snapshot row answers three questions: which sub, which public record, and what that record shows on the check date. A row is flagged when a license has expired, is marked inactive or expires before the next check. The records behind each row are described on contractor license verification and certificate of insurance tracking.

Every flag in a live snapshot is opened again on the official site the morning it is sent, because open datasets can trail the live record. The subcontractor vetting method explains each step that produces the document.

Sourced numbers

The dates a snapshot is built on

The sample is invented, but these figures are real: read on the publishers’ own pages in November 2026.

Those figures are why a snapshot reads dates rather than a yes or no. Licenses lapse on fixed cycles, so a record that is current today can expire mid-job. An open dataset can also trail the live record by days, which is why a person re-checks each flag on the official site the morning of the send. COI Tracking Service is set up for Chicago subcontractor checks and Austin subcontractor checks first; the Florida cycle is shown only as an example of how renewal dates work.

Process

How a live snapshot is produced

The snapshot is the output of three steps, and the first is a phone call.

  1. Step 1

    Call and pick the jobs to start from

    Tell Tim your markets and the company name on your permits. Tim can open a sample like this one while you talk.

  2. Step 2

    We read your permits and each sub’s records

    The subs named on your permits are listed, and each is read against the city or state record for its trade in that market.

  3. Step 3

    Each flag is confirmed that morning, then sent

    A person opens every flag on the official site the morning of the send, and only confirmed flags go into the snapshot.

Sample deliverable

The sample Sub Risk Snapshot, row by row

One general contractor, three sample permits, six subs. All of it is fictional.

SAMPLE · FICTIONAL DATA
Prepared forExample Construction Co. (fictional)
MarketChicago, IL (sample)
Permits readSample permits A, B and C
Records checkedNovember 21, 2026
Flags confirmed on the official siteMorning of November 21, 2026
Next scheduled checkDecember 21, 2026

Flag and watch items

Sample Electric Co.
Electrical contractor on sample permit A
City electrical contractor list: license expiration date December 4, 2026, 13 days after the check date
Flag: expires before the next scheduled check
Sample Carpentry Co.
General contractor license, sub on sample permit A
City general contractor list: insurance expiration date January 9, 2027, 49 days after the check date
Watch: inside the 60-day window set for this sample

Subs with no flag

Demo Plumbing Co.
Plumbing contractor on sample permits A and B
City plumbing contractor list: license and bond expiration dates after the window
No flag
Placeholder Masonry Co.
Mason contractor on sample permit B
City mason contractor list: license current, not marked inactive
No flag

Not checked or held for review

Example Glazing Co.
Glazing contractor on sample permit C
No city contractor license list for this trade
Not checked: no public list
Sample Roofing Co.
Named on sample permit C as “Sampel Roofing”
The permit spelling does not match any list entry exactly
Held for review: not reported as a finding
Every company, permit and date above is invented for this sample. In a live snapshot each row links to the official record it came from, and each flag carries the time it was confirmed on that site.

What this is, and what it is not

What this is

  • A dated summary of what public records show for the subs named on your permits
  • A list that marks every flag, every gap and every name held back
  • A starting point for your own follow-up with a sub, with a link to each official record

What this is not

  • Not an official license lookup, and not a statement by any city or state
  • Not a judgement that a company is unfit, unsafe or acting unlawfully
  • Not legal advice, and not a substitute for the certificates you collect
  • Not a record of real companies: every name in the sample is invented

Ask for a snapshot built from your own permits

Tim can show how a Sub Risk Snapshot would read the subs on one of your current permits, row by row.

Call (333) 333 333
Services

The checks behind each snapshot row

Each status in the sample comes from one of these checks.

Certificate of insurance tracking

Feeds the watch status: insurance and bond expiry dates where a city list publishes them.

Contractor license verification

Feeds the flag status: license expiry and inactive markers for each sub’s trade.

OSHA and safety checks

Not in the sample: a planned addition for public safety records.

Subcontractor prequalification

The ongoing audit that rebuilds the snapshot on a schedule.

First markets

Chicago, IL

City permits and Department of Buildings contractor lists, as in the sample.

Austin, TX

City permit data with Texas trade-license and franchise-tax records.

The COI Tracking Service home page gives the short version of all four checks.

Rules

How each status in a snapshot is decided

The same five statuses appear in every snapshot, in every market.

Days are counted from the check date

A date on the record is compared with the date the records were checked. In the sample, the electrical license expires December 4, 2026, which is 13 days after the November 21 check and before the next check on December 21, so it is a flag.

A watch is a date inside your window

An insurance or bond expiry date that falls inside the window you agree with Tim is marked watch, not flag. The sample uses a 60-day window, so an insurance date 49 days out is a watch item.

Not checked is never a pass

Some trades have no public license list in a market. Those subs are listed as not checked, so a gap cannot be mistaken for a clean record.

Name mismatches are held back

A permit spelling that does not match a license list exactly is held for review and is not reported as a finding.

Verified that morning

Every flag is re-opened on the official site the morning a live snapshot is sent, and the snapshot records when.

Status key for a Sub Risk Snapshot: flag, watch, no flag, not checked, held for reviewFive statuses, each with its rule. Flag is highlighted: the record has expired, is inactive, or expires before the next scheduled check.Status keyFlagExpired, inactive, or expires beforethe next scheduled checkWatchInsurance or bond expiry insidethe window agreed on the callNo flagRecord current, not marked inactive,no date inside the windowNot checkedNo public list for this tradein this marketHeld for reviewPermit name did not match a recordexactly; never sent as a finding
The five statuses used in every Sub Risk Snapshot. Only a flag confirmed on the official site is sent as a flag.
Why it helps

Why the snapshot is laid out this way

One row per sub
A project manager can find a sub by name and see its record without reading the whole document.
The date beside the status
A status without its date goes stale; the date lets your team judge how much time is left.
Gaps in plain sight
Subs that were not checked or were held back are listed, so the document never overstates what it covers.
Source on every row
Each row in a live snapshot links to the official record, so anyone can open it and check.
Cost

How much does a Sub Risk Snapshot cost?

A Sub Risk Snapshot is part of an ongoing audit, so its cost follows the scope of that audit rather than a per-report price. The scope depends on:

  • How many subs are named on your active permits
  • Which supported markets those permits are in
  • Which records are read for each sub
  • How often the snapshot is rebuilt while jobs are open

Tim will go through those factors on the phone and give you a figure for your jobs. Call for a quote.

Call (333) 333 333
FAQ

Sub Risk Snapshot questions

Is the sample built from real companies?

The sample Sub Risk Snapshot uses invented companies, permits and dates only. No real contractor, license number or finding appears on this page.

How current is a live snapshot?

A live Sub Risk Snapshot is read from public records and then each flag is confirmed on the official site the morning it is sent. The snapshot states the check date and when each flag was confirmed.

What does a flag mean?

A flag in a Sub Risk Snapshot means the public record, on the check date, shows a license that has expired, is marked inactive or expires before the next scheduled check. It describes the record, not the company’s conduct.

Why does the snapshot list subs that were not checked?

A Sub Risk Snapshot lists every sub named on your permits, including those whose trade has no public list in that market. Marking them not checked keeps a gap from looking like a clean record.

Does a snapshot with no flags mean a sub is safe to hire?

A Sub Risk Snapshot with no flags shows only that the records checked were current on that date. It says nothing about workmanship, safety or finances, and your own prequalification still applies.

Sources

Sources for this page

Each link opens the publisher's own record. We cite what the page states and nothing else.

  1. City of Chicago Department of Buildings: contractor license lists City of Chicago Department of Buildings. Primary source.
  2. Texas Open Data Portal: TDLR All Licenses Texas Department of Licensing and Regulation (via data.texas.gov). Primary source.
  3. Florida DBPR: Construction Industry Licensing Board Florida Department of Business and Professional Regulation. Primary source.
Credentials

Public bodies whose records this page cites

Text links to the public bodies whose records we read. We are not affiliated with any of them, and no badge or endorsement is implied.

Next step

Call to see a snapshot of your own subs

Tim can build the first rows of a Sub Risk Snapshot from one of your own permits while you are on the phone.

Still have questions? Call us at (333) 333 333.

Chicago and Austin first. Call, no forms.
Call (333) 333 333