COI Tracking ServiceCall (333) 333 333
The method

How Subcontractor Vetting Works

Subcontractor vetting at COI Tracking Service follows one method in every market: name the subs from public permits, read each public record and its date, then have a person confirm every flag before you see it.

Call (333) 333 333
Direct line(333) 333 333
  • Call, no forms
  • Public records only
  • A person confirms every flag
Construction engineer in a white hard hat and safety vest holding a tablet at a building site
Short answer

The vetting method in brief

Subcontractor vetting at COI Tracking Service follows the same order in every market. We start from the building permits that name your company as general contractor, because those records already list the trade contractors working under you. Nobody has to send us a sub list, and no sub is asked to log in anywhere.

Each named sub then goes through subcontractor vetting against the public records for its trade and its market: license status and expiry, inactive markers, business standing, and insurance or bond expiry where a city list carries those dates. The checks for each market are set out on the pages for subcontractor vetting in Chicago and subcontractor vetting in Austin.

Vetting is only as good as the match between a permit name and a license record. A person opens every possible flag on the live official site the morning a snapshot is sent, and anything that cannot be confirmed is held back rather than reported. The finished document looks like the sample Sub Risk Snapshot.

Sourced numbers

Public records the vetting method reads

The city permit portals and the Texas open-data portal supplied these figures, opened in November 2026.

Those figures explain the shape of the method. Permit data that is refreshed daily lets a check start from current jobs, and a long permit history lets us see which subs a general contractor has used before. The Texas franchise-tax file adds a business-standing field, the Right to Transact Business Code, that a trade license list does not carry.

Process

Three steps from the first call to the first snapshot

The first step is a phone call. The other two are done for you.

  1. Step 1

    Call us with your markets and the name on your permits

    Tim needs to know where you hold active permits and how your company name appears on them. That call replaces any intake form.

  2. Step 2

    We name your subs and read their records

    We pull the permits that list you as general contractor, build the sub list from the trade contractors on them, and read each sub’s license, standing and expiry records for that market.

  3. Step 3

    A person confirms each flag before the snapshot goes out

    Every possible flag is opened on the official site the same morning. What survives that check goes into the snapshot with its date and its source.

Scope

What the vetting method checks, and what it leaves alone

The scope is set by what each city and state publishes, so it is the same for every general contractor in a market.

What each pass of the method covers

  • Every trade contractor named on your active permits in a supported market
  • License status, inactive markers and expiry dates from the city or state list for that trade
  • Insurance or bond expiry dates where the city list publishes them
  • Business standing from state records where they are published as open data
  • A dated note of every source that was read, and of every sub that could not be checked

What the method does not do

  • It does not ask your subs for uploads, logins or questionnaires
  • It does not report a name match as a finding until a person confirms it
  • It does not judge a sub’s workmanship, finances or fitness for a job
  • It does not run OSHA inspection checks yet; those are a planned addition
Subcontractor vetting method in five stages, from public permits to the Sub Risk SnapshotFive stacked stages joined by a line: public permits, sub list, record checks, a person verifies each flag, and the Sub Risk Snapshot. The verification stage is highlighted. A note says a name match without a confirmed record stays out of the snapshot.The vetting method, top to bottom1Public permitsThe general contractor and trade contractors named on one record2Sub listOne row for each named sub, with the permit it came from3Record checksLicense status and expiry, business standing, insurance or bond expiry4A person verifiesEach flag opened on the live official site that morning5Sub Risk SnapshotWhat each record shows, with its date and its sourceA name match without a confirmed record stays out of the snapshot
The five stages of subcontractor vetting. Stage four, a person on the official site, is the one that decides what reaches you.

Hear the method applied to one of your jobs

Tim can take one of your current permits on the call and walk through how subcontractor vetting would read each sub on it.

Call (333) 333 333
Services

Where the vetting method is applied

Each check below is one part of the same method.

Certificate of insurance tracking

The insurance and bond expiry part of the method, set beside the certificates of insurance you already collect.

Contractor license verification

The license part of the method: status, inactive markers and expiry for each named sub.

OSHA and safety checks

What public safety records could add to the method once that check is running.

Subcontractor prequalification

The method run as an ongoing audit, for subs on current jobs and subs you are about to bring on.

The method is the same on the COI Tracking Service home page and in each market page, and the sample snapshot with fictional companies shows its output.

Rules

Public-data and verification rules for each step

These rules decide what a snapshot may say. They apply in every market.

Step one reads only public permits

The sub list comes from City of Chicago building permit records and the City of Austin issued construction permits. If a sub never appears on a permit, the method does not know about it, and Tim will say so on the call.

Step two reads the record for that trade

Chicago subs are read against the Department of Buildings contractor lists. Texas trade subs are read against the TDLR license dataset, and business standing against the Comptroller franchise-tax file. Where no public list exists for a trade, the snapshot says the sub was not checked.

Public records read in each supported market (read November 2026)
RecordPublisherWhat it adds to the check
Building PermitsCity of ChicagoThe general contractor and trade contractors named as contacts on the same permit
Contractor license listsCity of Chicago Department of BuildingsLicense expiration dates, license inactive markers, insurance expiration on the general contractor list and bond expiration on the plumbing list
Issued Construction PermitsCity of AustinContractor trade and company name, with a master permit number that ties trade permits together
TDLR All LicensesTexas Department of Licensing and Regulation, via data.texas.govLicense type and license expiration date for trades such as electrical and air conditioning contractors
Active Franchise TaxpayersTexas Comptroller of Public Accounts, via data.texas.govThe Right to Transact Business Code, a business-standing field

Step three is a person on the official site

Open datasets can lag behind the live record, and company names drift between a permit and a license list. So every flag is opened on the official site the morning a snapshot is sent, and an unconfirmed match is held back.

Wording rule

A finding states what a public record shows on a date. Our operating rule is that the wording of findings is checked by a lawyer before it is used; that is a rule we work by, not a credential.

OSHA records are not yet part of the method

Federal inspection data is a planned addition. Until that check runs, no snapshot reports on safety records.

Why it works

Why the method is built this way

Permits before questionnaires
A permit is filed by your own company, so the sub list does not depend on what a sub chooses to disclose.
Dates, not only status
Reading the expiry date shows a license or bond that is current today but will lapse during the job.
A person decides each flag
Name matching finds candidates. Only a person on the official site turns a candidate into a finding.
Gaps are written down
A sub with no public list is marked not checked, so a missing record is never read as a clean one.
Cost

How much does subcontractor vetting cost with this method?

Subcontractor vetting is priced on the work the method takes for your jobs, so there is no list price. The scope depends on:

  • How many trade contractors are named on your active permits
  • Which supported markets your permits are in
  • Which records are read for each sub: license, business standing, insurance or bond expiry
  • How often you want the snapshot rebuilt while jobs are open

Tim will size those factors with you on the phone. Call for a quote.

Call (333) 333 333
FAQ

Questions about how subcontractor vetting works

Do my subcontractors have to do anything?

Subcontractor vetting with this method asks nothing of your subs. Their names come from your public permits and their records come from the city or state, so there are no invitations, uploads or logins.

What if a sub is not named on any permit?

Subcontractor vetting starts from permits, so a sub who is not named on one is not picked up automatically. Tell Tim about any sub you want checked, and it can be read against the same public records where its trade has a list.

Why does a person check every flag?

Subcontractor vetting matches companies by name, and names on permits and license lists do not always agree. A person opens each possible flag on the live official site that morning, so a renamed or mistyped company is not reported as a problem.

Do you check OSHA inspection records?

Subcontractor vetting does not include OSHA inspection records yet. Federal inspection data is a planned addition, and the OSHA and safety checks page explains what it would add.

Who checks the wording of a finding?

Subcontractor vetting findings are written as what a public record shows on a stated date. Our operating rule is that a lawyer checks that wording before it is used, and a finding never says a company is unfit or acting unlawfully.

Sources

Sources for this page

Each link opens the publisher's own record. We cite what the page states and nothing else.

  1. City of Chicago Data Portal: Building Permits City of Chicago. Primary source.
  2. City of Austin Open Data: Issued Construction Permits City of Austin. Primary source.
  3. Texas Open Data Portal: Active Franchise Taxpayers Texas Comptroller of Public Accounts (via data.texas.gov). Primary source.
  4. City of Chicago Department of Buildings: contractor license lists City of Chicago Department of Buildings. Primary source.
  5. Texas Open Data Portal: TDLR All Licenses Texas Department of Licensing and Regulation (via data.texas.gov). Primary source.
Credentials

Public bodies whose records this page cites

Text links to the public bodies whose records we read. We are not affiliated with any of them, and no badge or endorsement is implied.

Next step

Call to run the method on your own permits

Tell Tim where you build and the name on your permits, and Tim will show which subs the method finds and which records it would read.

Still have questions? Call us at (333) 333 333.

Chicago and Austin first. Call, no forms.
Call (333) 333 333