COI Tracking ServiceCall (333) 333 333
Done-for-you service

Certificate of Insurance Tracking and Subcontractor Vetting for General Contractors

COI Tracking Service does subcontractor vetting for general contractors as a done-for-you check of the subs already named on your active jobs, including license and insurance expiry dates wherever the public record shows them.

Call (333) 333 333
Direct line(333) 333 333
  • Call, no forms
  • A person checks every flag
  • Chicago and Austin first
Yellow tower crane beside a multi-storey concrete building under construction with a yellow-and-white finished wing
Sample Sub Risk Snapshot folio with fictional companies A filing folder labelled sample and fictional holds a one-page Sub Risk Snapshot prepared for Example Construction Co. One sub, Sample Electric Co., is flagged because its city electrical license expires December 4, 2026, 13 days after the check date of November 21, 2026. Two other subs show no flag and one trade was not checked. SAMPLE · FICTIONAL DATA Sub Risk Snapshot Prepared for Example Construction Co. Records checked November 21, 2026 FLAG Sample Electric Co. City electrical license expires Dec 4, 2026 13 days after the check date Demo Plumbing Co. City plumbing license current · no flag Placeholder Masonry Co. City mason license current · no flag Example Glazing Co. No city list for this trade · not checked Flag confirmed on the official site before sending
Short answer

Subcontractor vetting, in short

Subcontractor vetting at COI Tracking Service starts from public building permits, not from a portal your subs have to log into. In Chicago, one permit record can name the general contractor next to the electrical, plumbing, masonry and ventilation contractors on the job, so the list of subs to check comes from the city’s own data.

Each sub on that list then goes through subcontractor vetting against the records the city or state publishes: license expiry, inactive flags, insurance or bond expiry where the list carries it, and business standing. The result is one document, a Sub Risk Snapshot, that shows each record, its date and its source.

Findings from subcontractor vetting are only useful if they are right. A person confirms every flag on the live official site the morning a snapshot is sent, a match on company name alone is never reported as a finding, and our operating rule is that the wording of every finding is reviewed by a lawyer before it is used.

COI Tracking Service sells subcontractor vetting as an ongoing audit for general contractors running active commercial work, not as self-serve software. How subcontractor vetting works sets out each step; Tim takes the calls and can walk through a sample against your own permits.

Sourced numbers

Public records that make subcontractor vetting possible

Each number comes from the publisher’s own record, read for this page in November 2026.

Those fields are why subcontractor vetting can start without asking your subs for anything. A Chicago permit names the trade contractors; the city’s lists carry the dates that matter; Austin links trade permits to a master permit; Texas publishes trade licenses and franchise-tax standing as open data. Other cities publish less, which is why subcontractor vetting in Chicago and subcontractor vetting in Austin come first.

Process

How subcontractor vetting works, in three steps

Three steps, and the first one is a phone call.

  1. Step 1

    Call and name your active jobs

    Tell Tim which markets you build in and roughly how many subs are on your current jobs. There is nothing to fill in; the call is the whole intake.

  2. Step 2

    We pull your permits and check every sub

    We find the permits that name your company as general contractor, list the trade contractors on them, and check each one against the city contractor license lists or the state records for that market.

  3. Step 3

    A person verifies each flag, then you get the snapshot

    Every flag is confirmed on the live official site that morning, before the snapshot reaches you. The full vetting method covers each source and its limits.

The deliverable

What a Sub Risk Snapshot contains

One document per general contractor, rebuilt each time the check runs.

In every snapshot

  • Each sub named on your permits, with the permit it came from
  • The public record checked for that sub, and the date on that record
  • A flag for a license that has expired, is marked inactive or expires soon, and for insurance or bond expiry where the city list carries it
  • When each flag was confirmed on the official site
  • A plain note of what was not checked, so a gap is never read as a pass

Have ready when you call

  • The markets where you hold active permits
  • Your company name as it appears on those permits
  • Roughly how many subs are on current jobs
  • Any subs you already watch closely

See the sample Sub Risk Snapshot, built with fictional companies, for the layout and the wording of a flag.

See a snapshot built from your own permits

Tim can open one of your active permits during the call and show how subcontractor vetting reads it, sub by sub.

Call (333) 333 333
Services

Subcontractor vetting services and first markets

Four checks, two markets, one snapshot.

Certificate of insurance tracking

Insurance and bond expiry dates that a city publishes for contractors, set beside the certificates you already collect.

Contractor license verification

License status, inactive flags and expiry dates for each sub, read from the city or state list for that trade.

OSHA and safety checks

What a public safety-record check can add to subcontractor vetting, and what it is not yet part of.

Subcontractor prequalification

The ongoing audit that ties the checks together for subs you already use and subs you are about to hire.

First markets

Chicago, IL

First market. City permits name the trade contractors, and city license lists carry license and insurance or bond expiry dates.

Austin, TX

Second market. City permit data with a master permit number, plus Texas trade-license and franchise-tax open data.

Every check feeds the same Sub Risk Snapshot, and the vetting method applies in each market.

Rules

Public-data and verification rules we work by

These rules apply to every snapshot, in every market.

Public records only

Subcontractor vetting here uses records that cities and states publish for anyone to read: permits, contractor license lists and business-standing data. We do not buy private data, and we do not ask your subs for logins or uploads.

A person confirms every flag

Records are matched by company name, and company names change. A renamed company can look inactive on a list, so no flag is reported until someone has opened the official record and confirmed it the same morning.

Careful wording

A snapshot states what a public record shows on a date, for example that a license on the city list expires on a stated day. It never says a company is unfit or acting unlawfully, and the wording of findings is reviewed by a lawyer before use.

No official status

COI Tracking Service is not a licensing board, a city department or an insurer, and it is not affiliated with any of them. Where a decision depends on a record, the official record is the authority, and the snapshot links to it.

Why it helps

Why general contractors use a done-for-you check

It starts from records you already trust
The sub list comes from the permits your own company pulled, and the checks come from the city or state that issues the license.
Your subs do nothing
There are no portal invitations to send and no uploads to chase; subcontractor vetting reads what is already public.
It reads dates, not only status
A license that is active today but expires in two weeks is flagged while there is still time to act.
One call, no forms
Tim sets up the check by phone, and the snapshot arrives as a document you can forward to your project team.
Steel frame of a commercial building rising beside a tower crane
Cost

How much does subcontractor vetting cost?

The cost of subcontractor vetting depends on the scope of the ongoing audit rather than on software seats, so there is no published price. The main factors are:

  • How many active subcontractors are named on your current permits
  • How many markets you build in, and whether each one publishes permit and license data
  • Which public sources are checked for each sub: license status, business standing, insurance or bond expiry
  • How often the snapshot is rebuilt while your jobs are active

Tim will walk through those factors with you on the phone and give you a figure for your own jobs. Call for a quote.

Call (333) 333 333
FAQ

Subcontractor vetting questions

What is subcontractor vetting?

Subcontractor vetting is a check of the subcontractors on a general contractor’s jobs against public license, business and insurance records, so that an expired or inactive record is found before it becomes a problem on site. COI Tracking Service does that check for you and reports it as a Sub Risk Snapshot.

Is COI Tracking Service a software product?

Subcontractor vetting from COI Tracking Service is a done-for-you service, not a software login. We pull the records, a person confirms each flag, and you receive the finished snapshot; there is nothing for you or your subs to install or fill in.

Where do you get the names of my subcontractors?

Subcontractor vetting starts from public building permits that name your company as general contractor. A City of Chicago permit record can list up to 15 contacts, including electrical, plumbing and masonry contractors, and Austin permit data links trade permits to a master permit number.

Do you collect certificates of insurance from my subs?

Subcontractor vetting reads insurance and bond expiry dates where a city publishes them, such as the insurance expiration date on Chicago’s general contractor list and the bond expiration date on its plumbing list. It does not replace the certificates you collect; call us to talk through how the two fit together.

Which cities do you cover?

Subcontractor vetting is set up for Chicago, IL and Austin, TX first, because their open data names the subs on a general contractor’s permits. Other markets are added only when their public records support the same checks.

Sources

Sources for this page

Each link opens the publisher's own record. We cite what the page states and nothing else.

  1. Texas Open Data Portal: Active Franchise Taxpayers Texas Comptroller of Public Accounts (via data.texas.gov). Primary source.
  2. City of Chicago Data Portal: Building Permits City of Chicago. Primary source.
  3. City of Chicago Department of Buildings: contractor license lists City of Chicago Department of Buildings. Primary source.
  4. City of Austin Open Data: Issued Construction Permits City of Austin. Primary source.
  5. Texas Open Data Portal: TDLR All Licenses Texas Department of Licensing and Regulation (via data.texas.gov). Primary source.
Credentials

Public bodies whose records this page cites

Text links to the public bodies whose records we read. We are not affiliated with any of them, and no badge or endorsement is implied.

Next step

Call to walk through a snapshot for your jobs

Tell Tim where you build, and Tim will show how subcontractor vetting reads your own permits and which checks your markets support.

Still have questions? Call us at (333) 333 333.

Chicago and Austin first. Call, no forms.
Call (333) 333 333