COI Tracking ServiceCall (333) 333 333
First market

Subcontractor Vetting and COI Tracking in Chicago, IL

Subcontractor vetting in Chicago reads the trade contractors named on your City of Chicago building permits against the Department of Buildings license lists, including insurance and bond expiry dates where the city publishes them.

Call (333) 333 333
Direct line(333) 333 333
  • Call, no forms
  • Chicago records first
  • A person checks every flag
Chicago downtown skyline at sunset with a high-rise under construction and working cranes above the trees
Short answer

Subcontractor vetting in Chicago, in short

Subcontractor vetting in Chicago starts with the city’s own building permits. The City of Chicago Building Permits data carries up to 15 contacts on each permit, each with a type and a name, so a single record can show the general contractor beside the electrical, plumbing and masonry contractors on the same job.

Subcontractor vetting then reads each of those trade contractors against the Department of Buildings license list for its trade. The city publishes lists for general, electrical, elevator mechanic, mason and plumbing contractors, each with a license expiration date and a license inactive column; the general contractor list adds an insurance expiration date and the plumbing list a bond expiration date.

Subcontractor vetting is only useful when the flags are right, so a person opens the live city record and confirms every flag the morning a Sub Risk Snapshot is sent. A match on company name alone is never reported as a finding.

COI Tracking Service runs subcontractor vetting in Chicago as an ongoing audit for general contractors with active commercial permits in the city. Tim takes the calls and can open one of your Chicago permits with you to show how the check reads it.

Sourced numbers

Chicago records behind each check

Each number comes from the City of Chicago’s own record, read or counted for this page in November 2026.

Those figures explain why Chicago is the first market. New-construction and renovation permits are where trade contractors appear by name, the license lists give each trade a date to check, and daily updates mean a snapshot can be rebuilt from current records. The counts are totals across the city and say nothing about any single contractor.

Process

How subcontractor vetting works for a Chicago general contractor

Three steps for a Chicago check, and the first one is a phone call.

  1. Step 1

    Call us with your Chicago jobs

    Tell Tim the company name on your Chicago permits and roughly how many subs are on current jobs. The call is the whole intake; there is nothing to fill in.

  2. Step 2

    We read your permits and the city lists

    We find the Chicago permits that name your company as general contractor, list the trade contractors on them and read each one against the Department of Buildings contractor lists.

  3. Step 3

    A person confirms each flag, then you get the snapshot

    Every flag is checked on the live city record that morning. The snapshot shows the permit, the list, the date and what was not checked.

The check

What subcontractor vetting covers in Chicago

One check per general contractor, built from Chicago records and rebuilt while your jobs are active.

What a Chicago check includes

  • Each trade contractor named on your City of Chicago permits, with the permit it came from
  • The license expiration date and license inactive column on the city list for that trade
  • Insurance expiration dates on the general contractor list and bond expiration dates on the plumbing list
  • A flag for an expired, inactive or soon-to-expire record, confirmed on the city site
  • A note of each trade with no city list, so a gap is never read as a pass

Have ready when you call

  • Your company name exactly as it appears on your Chicago permits
  • The jobs or addresses you want covered first
  • Roughly how many subs are on current Chicago jobs
  • Any subs you already watch closely
How subcontractor vetting reads Chicago public records Four steps. A City of Chicago building permit names the general contractor and up to 15 contacts. The trade contractor contacts become the list of subs. Each sub is read against the Department of Buildings license list for its trade, including license expiry and, on the general and plumbing lists, insurance or bond expiry. A person confirms each flag before it goes into the Sub Risk Snapshot. 1 · City building permit Names the general contractor and up to 15 contacts Building Permits data, 2006 to present 2 · Trade contacts Electrical, plumbing, mason and other contractor types This list is the subs to check 3 · City license lists License expiry and inactive flag Insurance or bond expiry General and plumbing lists only 4 · Sub Risk Snapshot Each flag confirmed by a person on the official site that morning Sent to the general contractor
How a Chicago permit becomes a checked list of subs. The figure shows the method only; it holds no contractor data.

Walk through one of your Chicago permits

Tim can open a current Chicago permit during the call and show which subs subcontractor vetting would read and which city list each one sits on.

Call (333) 333 333
Services

Checks that make up subcontractor vetting in Chicago

Each Chicago check reads a named city record.

Certificate of insurance tracking

Chicago publishes insurance expiration dates for general contractors and bond expiration dates for plumbing contractors; we set those beside the certificates you collect.

Contractor license verification

License expiration and inactive flags for each trade the city lists: general, electrical, elevator mechanic, mason and plumbing.

Subcontractor prequalification

The same Chicago records, read before you hire a sub you have not used on a city permit.

OSHA and safety checks

A planned addition. Public safety-record checks are not part of a Chicago snapshot yet.

Every Chicago check feeds one sample Sub Risk Snapshot layout, and the full vetting method explains each step. The COI Tracking Service home page covers the service as a whole.

Rules

Chicago public-data and verification rules

These rules apply to every Chicago snapshot.

City records first

Subcontractor vetting in Chicago reads the city’s own permit data and Department of Buildings lists. The city states that a City of Chicago general contractor license is required for most building construction, alteration, repair and demolition work in the city, which is why the general contractor list is the first one read.

State licenses are separate

The Department of Buildings notes that additional licenses issued by the State of Illinois may be required for some work. A Chicago snapshot covers the city lists and says so; it does not report on state licenses it has not read.

Names are confirmed, not assumed

Permit contacts and license lists are matched by company name, and names change. No flag is reported until a person has opened the city record and confirmed it the same morning.

Careful wording

A snapshot states what a Chicago record shows on a date, for example that a license on the city list expires on a stated day. It never says a company is unfit or acting unlawfully, and our operating rule is that the wording of findings is reviewed by a lawyer before use.

No official status

COI Tracking Service is not part of the City of Chicago or its Department of Buildings. The city record is the authority, and the snapshot links to it.

Why Chicago

Why Chicago is the first market

The permit names the subs
Chicago permit records carry typed contacts, so trade contractors appear beside the general contractor without asking anyone for a sub list.
The lists carry dates
Each Department of Buildings list has a license expiration date, and two lists add an insurance or bond expiration date.
Inactive records stay visible
The city site covers current contractors and those with recently expired or inactivated licenses, so a lapse can be seen rather than inferred from a missing row.
Records refresh daily
Permit data is updated daily, so each snapshot is built from the records as they stand that week.
Cost

How much does subcontractor vetting in Chicago cost?

The cost of subcontractor vetting in Chicago depends on the scope of the ongoing audit, so there is no published price. The main factors are:

  • How many trade contractors are named on your active Chicago permits
  • Which city lists apply to those trades, and whether insurance or bond dates are read as well as license dates
  • How often the snapshot is rebuilt while your Chicago jobs are active
  • Whether subs you are about to hire are checked before hiring as well as subs already on site

Tim will walk through those factors for your Chicago jobs on the phone. Call for a quote.

Call (333) 333 333
FAQ

Subcontractor vetting in Chicago: questions

Which subcontractors can you check in Chicago?

Subcontractor vetting in Chicago covers the trades the Department of Buildings publishes lists for: general, electrical, elevator mechanic, mason and plumbing contractors. A trade with no city list is shown in the snapshot as not checked.

Where do you get the names of my Chicago subcontractors?

Subcontractor vetting in Chicago starts from the City of Chicago building permits that name your company as general contractor. Each permit record can carry up to 15 contacts with a type and a name, which is where the trade contractors on the job appear.

Do the Chicago lists show insurance dates?

Subcontractor vetting in Chicago reads an insurance expiration date on the city’s general contractor list and a bond expiration date on its plumbing list. The electrical, elevator mechanic and mason lists show license dates and an inactive column, not insurance dates, so certificates you collect still matter.

Does a Chicago snapshot cover State of Illinois licenses?

Subcontractor vetting in Chicago reads the City of Chicago lists, and the Department of Buildings notes that State of Illinois licenses may also be required for some work. A snapshot names the records it read, so a state license that was not read is never shown as a pass.

What if a Chicago sub’s name on the permit does not match the license list?

Subcontractor vetting in Chicago treats a name mismatch as a question, not a finding. A person checks the live city record, and nothing is flagged unless the record itself shows the expired, inactive or expiring date.

Sources

Sources for this page

Each link opens the publisher's own record. We cite what the page states and nothing else.

  1. City of Chicago Data Portal: Building Permits City of Chicago. Primary source.
  2. City of Chicago Department of Buildings: contractor license lists City of Chicago Department of Buildings. Primary source.
  3. City of Chicago Data Portal: Building Permits, permits issued in 2025 by permit type City of Chicago. Primary source.
  4. City of Chicago Department of Buildings: Trade License Information Center City of Chicago Department of Buildings. Primary source.
Credentials

Chicago public bodies whose records this page cites

Text links to the public bodies whose records we read. We are not affiliated with any of them, and no badge or endorsement is implied.

Next step

Call to walk through a snapshot for your Chicago jobs

Tell Tim the company name on your Chicago permits, and Tim will show which subs subcontractor vetting would read and which city lists apply.

Still have questions? Call us at (333) 333 333.

Chicago records first. Call, no forms.
Call (333) 333 333