COI Tracking ServiceCall (333) 333 333
Planned add-on

OSHA and Safety Checks on Subcontractors

OSHA and safety checks are a planned add-on to subcontractor vetting that would read public OSHA inspection data for the subs on your permits; license and insurance checks run today.

Call (333) 333 333
Direct line(333) 333 333
  • Call, no forms
  • Planned, not yet running
  • A person reads every record
Close-up of a fall-protection harness with carabiners and lanyards
Short answer

OSHA and safety checks, in short

OSHA and safety checks are a planned add-on to subcontractor vetting at COI Tracking Service, and they are not running yet. Today a snapshot covers license status, expiry dates, insurance and bond dates where a city publishes them, and business standing.

The planned OSHA and safety checks would read public federal data. OSHA publishes inspection and citation data that employers, workers and other interested parties may view and download, searchable by establishment, so the subs named on your permits could be looked up without asking them for anything.

Safety records need more care than license lists, so OSHA and safety checks would follow the same rule as every other check: a person reads each record before it is reported. An inspection is not a finding of fault, and a citation can be contested, so the snapshot would state what the record shows and its date.

OSHA and safety checks would sit beside contractor license verification and certificate of insurance tracking in one Sub Risk Snapshot. COI Tracking Service is not affiliated with OSHA or the Department of Labor.

Sourced numbers

Federal safety records behind OSHA and safety checks

OSHA publishes all four figures on its own site; we read them there in November 2026.

  • 34,696 total federal OSHA inspections in fiscal year 2024, per OSHA’s Commonly Used Statistics page read November 2026 Source: OSHA: Commonly Used Statistics
  • 5 of the 10 standards most frequently cited by federal OSHA in fiscal year 2024 are construction standards, led by fall protection Source: OSHA: Commonly Used Statistics
  • 22 State Plans that OSHA lists as covering private-sector and public workers, read November 2026; Texas has no State Plan, so federal OSHA covers most private work there Source: OSHA: State Plans
  • 7 State Plans that OSHA lists as covering only state and local government workers in 2026, Illinois among them, so federal OSHA covers private employers in Illinois Source: OSHA: State Plans

Those records are why OSHA and safety checks are worth planning. Construction standards dominate the most-cited list, and in both first markets private contractors fall under federal OSHA, whose inspection data is public. They are also why the check is not live yet: reading that data well needs approved access and a person to interpret each record.

Process

How OSHA and safety checks would work

Three steps, and the first one is a phone call. Steps two and three are planned.

  1. Step 1

    Call and ask about the safety add-on

    Tell Tim whether safety records matter to your prequalification. Tim will say plainly what runs today and where the OSHA step stands.

  2. Step 2

    We would search public OSHA inspection data

    Once the add-on is live, each sub named on your permits would be searched in OSHA’s public inspection data by establishment.

  3. Step 3

    A person would read every record before use

    Any inspection found would be read by a person, including whether a citation is open or contested, before one line goes in the snapshot. The vetting method applies to every check.

The add-on

What OSHA and safety checks would include

A planned scope, written down before the check is offered.

What the add-on would cover

  • Public OSHA inspection records for each sub named on your permits
  • The inspection date, and the citation status the record shows
  • A plain note where no record is found, which is not a safety rating
  • The source link for every record, so your team can open it

What it would not do

  • Rate a sub’s safety program or culture
  • Treat an inspection, or an open citation, as a finding of fault
  • Replace the safety questions in your own prequalification
  • Claim any partnership with OSHA

Ask where the safety add-on stands

Tim can tell you on the call when OSHA and safety checks are expected, and what your snapshot covers in the meantime.

Call (333) 333 333
Related checks

Checks that run today, beside OSHA and safety checks

Contractor license verification

License status, inactive flags and expiry dates from the city or state list for each trade. Running today.

Certificate of insurance tracking

Insurance and bond expiry dates a city publishes, set beside the certificates you hold. Running today.

Subcontractor prequalification

The ongoing audit that combines the checks for subs you use and subs you are about to hire.

Sample Sub Risk Snapshot

An invented example of the report; OSHA lines would be added to it once running.

The COI Tracking Service home page sets out the whole service.

Rules

Public-data and verification rules for safety records

These rules apply before any safety record is used.

Planned means planned

OSHA and safety checks are not part of any snapshot today. We will not describe them as running until the data access is approved and the method has been tested.

An inspection is not a verdict

OSHA runs targeted inspection programs and responds to fatalities, catastrophes and complaints, and under Section 10 of the OSH Act an employer has fifteen working days to contest a citation. A snapshot would report the record and its date, never a conclusion about a company’s safety.

A person reads every record

Establishment names in public data do not always match a company’s current name. No safety record would be reported until a person had read it and matched it to the right sub.

No official status

COI Tracking Service is not affiliated with OSHA, the Department of Labor or any State Plan. The agency’s own record is the authority, and the snapshot would link to it.

Why it waits

Why OSHA and safety checks are planned, not rushed

How planned OSHA and safety checks would add to a Sub Risk Snapshot A planned flow, not yet running. The sub's name comes from the permit. Public OSHA inspection data is searched by establishment. A person reads any inspection record, including whether citations are open or contested. The snapshot then states what the record shows and its date. License and insurance checks run today; the OSHA step is marked planned. Where an OSHA step would fit PLANNED ADD-ON · NOT YET RUNNING Permit names the sub running today OSHA data establishment search planned Human read open or contested planned Snapshot record and date running today Running today: license status, expiry, insurance and bond dates, business standing. Dashed boxes show the planned OSHA step. COI Tracking Service is not affiliated with OSHA.
The OSHA step, shown dashed, sits between the permit and the snapshot. License and insurance checks run today.
Construction leads the citation list
Five of federal OSHA’s ten most-cited standards in fiscal year 2024 were construction standards, so the records are relevant to subs.
Both first markets use federal data
Private employers in Illinois and Texas are covered by federal OSHA, so one public source would serve both.
Safety records need context
An inspection or citation means little without its status and date, which is why a person reads each one.
You hear the status straight
Tim will tell you what runs today rather than sell a check that is not live.
Cost

How much will OSHA and safety checks cost?

The cost of OSHA and safety checks is not set, because the add-on is not running yet. When it is offered, the main factors will be:

  • How many active subcontractors are named on your current permits
  • How far back the inspection search should look
  • Whether the add-on runs with license and insurance checks in one snapshot
  • How often the snapshot is rebuilt while your jobs are active

Tim can price the checks that run today and tell you where the safety add-on stands. Call for a quote.

Call (333) 333 333
FAQ

OSHA and safety checks questions

Are OSHA checks part of the snapshot today?

OSHA and safety checks are not part of the snapshot today; they are a planned add-on. A snapshot currently covers license status, expiry dates, insurance and bond dates where a city publishes them, and business standing.

Where would the safety data come from?

OSHA and safety checks would use public federal data: OSHA publishes inspection and citation data that employers, workers and other interested parties may view and download, searchable by establishment. We would not ask your subs for anything.

Does an OSHA inspection mean a sub did something wrong?

OSHA and safety checks would never treat an inspection as a finding of fault. OSHA inspects through targeted programs and in response to complaints, and an employer may contest a citation, so a snapshot would state only what the record shows and its date.

Do Illinois and Texas both use federal OSHA data?

OSHA and safety checks in both first markets would read federal data. OSHA states that private-sector employers in Illinois are covered by federal OSHA, and that Texas is under federal OSHA jurisdiction for most private-sector workers.

Is COI Tracking Service connected to OSHA?

OSHA and safety checks from COI Tracking Service would be an independent reading of public records. We are not affiliated with OSHA, the Department of Labor or any State Plan, and no endorsement is implied.

Sources

Sources for this page

Each link opens the publisher's own record. We cite what the page states and nothing else.

  1. OSHA: Data available to view and download Occupational Safety and Health Administration (U.S. Department of Labor). Primary source.
  2. OSHA: Commonly Used Statistics Occupational Safety and Health Administration (U.S. Department of Labor). Primary source.
  3. OSHA: State Plans Occupational Safety and Health Administration (U.S. Department of Labor). Primary source.
  4. OSHA: Enforcement Occupational Safety and Health Administration (U.S. Department of Labor). Primary source.
  5. Occupational Safety and Health Act, Section 10: Procedure for Enforcement Occupational Safety and Health Administration (U.S. Department of Labor). Primary source.
Credentials

Public bodies whose records this page cites

Text links to the public bodies whose records we read. We are not affiliated with any of them, and no badge or endorsement is implied.

Next step

Call to talk through safety records and your subs

Tell Tim how your prequalification handles safety today, and Tim will say what runs now and where OSHA and safety checks stand.

Still have questions? Call us at (333) 333 333.

Chicago and Austin first. Call, no forms.
Call (333) 333 333